I have done a little more research on knives of the period, but from what I have found it seems there is little to no difference between 18th century trade knives and early 19th century trade knives. Trade knives in general were simply inexpensive butcher knives. The number of pins in the handle do not date the knife, but only serve to identify the type, e.g. the 6 pin butcher knife having 6 pins in the handle. Rivets of course as I mentioned in an earlier post are a 20th century type.
Some handles such as the 6 pin are two seperate slabs which enclose the full tang. I have two originals that only have 5 pins, but they are identical to the 6 pin style.
Some blades only had a very short tang which was inserted into a sawn slot handle and secured with 3 pins. My Father had one of these that he used as a utility knife. The blade had been broken at some time.
Another type had a short pointed tang made for pushing into a handle, the same as a metal file. I also managed to purchase two of these in a second hand shop.
This lower one I use as a hunting knife. When I made a handle for it I drilled through handle and tang and inserted one brass pin to help secure the blade.
Found at an Iroquois site.
8 comments:
It would be interesting to know the purpose of that little nub on the tang of the Iriquois blade.
Very nice. I have an older knife, though I think, judging by the handle, that it's of post-Southern Independence. In the near future, I need to find a place to harden the steel. I can get the knife hair shaving sharp, but it loses that sharpness after cutting a single onion and chopping a couple cloves of garlic. I like it though, so I'm going to keep trying, and it was my great-grandfather's knife.
Yes Gorges, unfortunately it is not a very clear image. I wonder infact if it might be a metal loop or stirrup for attaching a leather thong?
Hutch, sounds like that knife is worth hanging onto. I would love to see an image of it one day.
Regards.
I believe you can look at it here:
http://i1083.photobucket.com/albums/j387/woodslandtrekker/Knives%20and%20such/Other%20things/100_2527.jpg
That's the cutlery I use most often. That poor Vanguard (left,middle) has been through hell and back without fail.
Thanks for the link Hutch. That blade on the right is a nice looking blade. Ignoring the rivets in the handle, that could easily be taken for an 18th century blade. If it were mine I would be taking that handle off, getting the blade rehardened and fitting a new handle on using pins instead of rivets.
Great looking blade Hutch.
Hi Le Loup.
The knife your father had which you say had the tip broken off, and that he used as a utility knife has a name, they call them 'Shoe Knives'
The tip was not broken, that is how they are made.
If you Google'Shoe Knife' and look for images you will will see these are the same as your fathers. I think they are still available from some Sheffield makers today.
Great site by the way. Spend lots of time here and learn a great deal.
Steve.
Thank you Steve, much appreciated. I have learnt something new today. I will have to google "shoe Knives".
Regards, Keith.
Post a Comment